Technical specifications | Specifications

Technical specifications	Juno 100	Juno 150
Diameter (cm)	111	156
Height (cm)	104	106
Weight (kg)	574	575
Height (cm) of the push-blade	57	51
Drive	Electric motor	Electric motor
Wheels	3	3
Speed (m/min)	12	12
Batteries	12V/55 Ah	12V/55 Ah
Determination of direction of movement	Gyroscope and ultrasound	Gyroscope and ultrasound
Determination of distance covered	Sensors on rear wheels plus collision or reset point on the route	Sensors on rear wheels plus inductive sensor
Number of programmable routes	16	16
Route programming	Use of manual control (E-link)	Use of manual control (E-link)
Reset points (direction)	Charging station plus collision or reset point on the route	Metal strips; start/end near charging station
Space required for approaching the charging station (m)	5	3
Space required for departing from the charging station (m)	1.00	1.50
Minimum width of feed alley (m)	1.25 + width of feed	2.00 + width of feed
Maximum width of feed mass (cm)	200	200
Maximum height of feed mass (cm)	65	65
Start interval	Flexible, max. 48 times a day	Flexible, max. 48 times a day
Charging unit: w x d x h (cm)	28 x 27 x 21	36.90 x 26 x 62.30
Outdoor use	No	Yes

Feeding alley:

Solid, level concrete floor, with or without coating.
Limited slope.
By outside navigation: a higher risk of rutting exists with a roadbed of bitumen in relation with warm or hot temperatures.

Feeding fence:

Vertical bars with maximum intervals of 60 cm.
Tested: headlocks, horizontal bar, parallel, U-model.
Horizontal bar at a height between (measured from the feeding alley floor):
- Juno 100: 80 and 135 cm.
- Juno 150: 80 and 150 cm*

*) In combination with an optional high level sensor.

Juno