Hydroflexcontrol | Why Lely?

Knotter
E-Link
Hydroflexcontrol
Powerfeed
Ram central lubrication

Every baler is only as good as its knotter

The tried and tested knotter systems process all standardised quality twines reliably and malfunction-free. The self-detaching double-loop knots have an above-average tensile strength, making a stripper arm unnecessary. Maintenance-free bearings on the knotter increase the service lifetime and minimise the maintenance required.

The well-proven knotters work with all standardised quality twines reliably and malfunction-free. The self-detaching double-loop knots have an above-average tensile strength, making a stripper arm unnecessary. Maintenance-free bearings on the knotter increase the service lifetime and minimise the maintenance required.

Twine boxes with huge capacity

Sufficient twine reserves for long working days behind easily accessible, pivoting protective guards. Quick and easy threading – simple to service and maintain.

Every baler is only as good as its knotter
Twine boxes with huge capacity

Everything on display – everything under control

The entire baler management, meaning all monitoring and operating functions, can be carried out via a small hand-held device with a clear layout from the tractor cab. All the important operating conditions are graphically represented in a large, well-lit display. The keypad, which is also lit up, can be used to make any necessary adjustments quickly and easily.

Slip Control – an overload protection which can think for itself

In addition to the usual baler management functions, E-Link has an automatic slip monitoring function. Shortly before the performance limit is exceeded, the E-Link reduces the tensile channel pressure slightly. This allows the machine speed to regulate itself and blockages are avoided. Afterwards, the E-Link system returns automatically to the original pressure level.

Everything on display – everything under control
Slip Control – an overload protection which can think for it..

Hydroflexcontrol – output is determined by throughput

Often the time for harvesting is limited and sometimes operators overstep a balers limits in terms of overload capacity. These limits are determined by the narrowest passage of the machine, which is decisive for its output. With balers, the space underneath the rotor is the critical factor. The Hydroflexcontrol anti blockage system increases this room in case of peak loads while at the same reducing downtime as a result of an inadequate forward speed or sorting out a blockage.

Flexcontrol + Hydroflex = increased baling output with less downtime

The two functions that are hidden in the name Hydroflexcontrol relate to the hydroflex floor which is underneath the rotor. The flex part avoids blockages; the hydro part solves blockages as and when they may occur. All Lely Welger balers with a chopping unit can be fitted with the Hydroflexcontrol system.

Flexible floor deals with peak loads

Flexcontrol is situated under the rotor where the feed passage is at its narrowest. It allows movement of the front part of the feed chamber floor to flex up and down via a rubber suspension – hence the word ‘flex’. If a small foreign object or a wet lump of material is picked up from the swath, this flexing action smoothes out the crop flow reducing the risk of blockages in the feed area.

Dealing with blockages from the tractor cab

The second feature is a hydraulic stage, whereby the rear of the feed table floor can be lowered hydraulically from the tractor seat to free the rotor of any blockage. When lowering the feed table floor the fact that all knives are also withdrawn ensures the blockage has passed into the bale chamber without any crop wastage before the operator re-engages the machine.

Hydroflexcontrol – output is determined by throughput
Flexcontrol + Hydroflex = increased baling output with less ..
Flexible floor deals with peak loads
Dealing with blockages from the tractor cab

Powerfeed

Automatic overload protection

Powerfeed – with this clutch, the drive and the packer are protected against overload. The device interrupts the power flow to the packer as soon as the performance limit is exceeded, and stops the pick-up. Powerfeed then automatically switches the drive back on and removes the blockage. The annoying replacement of shear bolts becomes a thing of the past.

Ram central lubrication

Good lubrication means good baling!

A centralised grease distribution unit supplies the ram guide rollers with lubricant. Each of the rollers is lubricated with a pre-determined quantity. Easy access to the lubrication system reduces maintenance and increases the service lifetime.

TECHNICAL SPECIFICATIONS
WELGER	D 4006	D 6006	D 4060	D 6060
XtraCut²⁵	x	x	25 blades	25 blades
Channel dimensions W x H (cm)	80 x 70	120 x 70	80 x 70	120 x 70
Bale length (cm)	90-250	90-250	90-250	90-250
Tying	4 x	6 x	4x	6x
Tying material plastic twine	Running length 130	Running length 130	Running length 130	Running length 130
Tying material holder	max. 16 rolls	max. 24 rolls	max. 16 rolls	max. 24 rolls

Splendimo Classic

Splendimo M

Splendimo MC

Splendimo F

Splendimo FC

Splendimo P

Splendimo PC

Welger AP

Welger RP 202

Welger RP 245

Welger RP 415

Welger RP 445

Welger RP 535

Welger DA

Welger RPC 445 Tornado

Welger D

Welger D

Welger D

Lely Welger D

Product overview

Powerfeed

Ram central lubrication