Quick bale transfer

The bale transfer is an extremely important function in a combination machine. On the Double Action, the wrapping table pivots with its loading arm directly under the tailgate. After leaving the bale chamber, the bale is loaded and pivoted into the wrapping position, whilst the tailgate closes, in total synchronisation with each other. This procedure takes exactly the same time as a Solo RP 235 would to eject a bale, meaning that the Double Action has exactly the same high bale capacity.

Hydroflexcontrol – output is determined by throughput

Often the time for harvesting is limited and sometimes operators overstep a balers limits in terms of overload capacity. These limits are determined by the narrowest passage of the machine, which is decisive for its output. With balers, the space underneath the rotor is the critical factor. The Hydroflexcontrol anti blockage system increases this room in case of peak loads while at the same reducing downtime as a result of an inadequate forward speed or sorting out a blockage.

Monitoring of film breakage

Monitoring film wrapping breakage is carried out via a light barrier on the Double Action. Once a film roll has been used up, or if a film tears, the light barrier can be set so that it switches automatically, making the table rotate at half speed. The current bale then finishes wrapping with the pre-selected overlap using one roll. Once the fault has been rectified, the system automatically switches back to full table rotation speed. If a film fault occurs, a warning is emitted on the handset, giving the option to continue wrapping at half speed or to rectify the film fault.

Wrapping system

Thanks to large guide rollers, the bales rotate securely on the wrapping table. This is particularly advantageous when working in extreme conditions, for example on very steep slopes.

WELGER	DA 235	DA 235 Profi
Dimensions L x W x H (m)	6,95 x 2,93 x 2,45	6,95 x 2,93 x 2,45
Bale chamber dimensions (m)	1.23 x 1,25	1.23 x 1,25
Bale chamber volume (m³)	1,50	1,50
Wrapping output (bales/h)	50	50
MasterCut13 crop chopping unit	o	-
XtraCut17 crop chopping unit	o	-
XtraCut25 crop chopping unit	-	●

Splendimo Classic

Splendimo M

Splendimo MC

Splendimo F

Splendimo FC

Splendimo P

Splendimo PC

Welger AP

Welger RP 202

Welger RP 245

Welger RP 415

Welger RP 445

Welger RP 535

Welger DA

Welger RPC 445 Tornado

Welger D

Welger DA

Welger DA

Lely Welger Double Action

Product description

Product overview