Welger RP 535

Huge bale chamber – Enormous capacity

With a diameter of 2 m and a width of 1.23 m the resulting volume of nearly 4 m3 means weights of up to 600 kg with wheat straw can be produced. This is double that of some other balers. This reduces baling costs: and considerably reduces the number of bales, standing time is minimal and net consumption is reduced. And finally, field clearing time is also dramatically reduced.

Constant Pressure System – Highest possible bale density

The bale chamber of the RP 535 is designed so that the specific area pressure on the bale surface is constant from 1 m to the set bale diameter up to 2 m. This is achieved by increasing the belt tension in respect to the increase in bale chamber diameter. Therefore a high compression of the baled crop is achieved throughout the bale diameter.

RP 535 – Large intake possibilities

The RP 535 is fitted as standard with a 2.25 m wide pick-up, which gathers the widest of swaths leaving a clean field. The crop is then transported via a heavy feed rotor into the bale chamber. The Powersplit gearbox divides the drive between the intake and the bale chamber.

Feed rotor or chopping unit

The RP 535 can be fitted with the same cutting systems as the RP 445 – Mastercut13, Xtracut17 and Xtracut25. In addition the RP 535 comes with Hydroflexcontrol. This feature allows blockages to be cleared from the feed rotor without leaving the tractor seat, which gives increased work output.