Tigo R Profi

Optimum intake with 7-row pick-up

The non-steered pick-up on the Tigo R Profi models have 7 tine bars with tines spaced 54 mm apart. This maintenance free pick-up consistently delivers clean work due to the fine tuning of the pick-up rotational speed releative to that of the chopping rotor.

Perfect chopping quality

The Tigo R chopping unit can be operated in two groups and can be fitted with 31 knives. This results in a minimum chopping length of 45 mm. The wide edges on the rotor tines together with these knives provide a highly precise chopping action. The knives are individually protected with the Trimatic knife protection system.

Maintenance-free drive with oil bath

The rotor is directly driven via an oil immersed drive. Direct drive means optimum transmission of power from the tractor to the loader wagon. A cam-type clutch protects the drive line against overloads. This maintenance free drive ensures many years of service at minimal cost.

Robust steel structure

The body is equipped with ropes on top to restrict the load bay and to prevent spillage. The straight sides contribute towards a rapid unloading action and prevent bridging.

Automatic loading system

The automatic loading system ensures optimum loading of the wagon so that each journey made is to maximum efficiency. The chopping rotor thrusts the crop upwards until a sensor in the roof is activated. The floor then shifts the load by a small amount at a time towards the rear where a second sensor at the tailgate detects that the maximum load has been taken on board and reports ‘Wagon full’. At the same time, the driver will receive an acoustic signal from their operator unit.

Lely Tigo RD – perfect discharging

Every Tigo R Profi loader wagon is available as an RD model with 2 or 3 discharge rollers. This discharge system spreads the forage evenly across the silo. The RD wagon can also be equipped with a hydraulically driven side discharge conveyor (optional) allowing forage to be discharged to the left or right-hand side of the machine. Available in two belt widths (550 and 700 mm) for optimum feed to the feeding area or fans. All RD models have a floor forward feed and reversing feed function and are equipped with a double wide-angle PTO shaft as standard.

Heavy-duty floor chain for rapid discharge

Four high grade annealed chains, 10 mm in diameter with an overall breaking strength of 50 tonnes, and offset carriers ensure reliable loading and discharge action. A 2-stage hydraulic motor with a rapid motion option is a standard feature on all Lely Tigo R Profi models.

High performance chassis

These loader wagons are equipped as standard with a tandem bogie axle unit and a rear steering axle. The enormous suspension travel ensures even load distribution as well as optimum ground contour flotation. Forced steering is available as an option. These Loader wagons can be fitted with tyres up to 800/R26.5.