Attis PS

Lely Attis PS

Output, flexibility, ease of control and sustainability are crucial for wrappers that are used intensively. Lely has taken all of these points into consideration when developing the Attis PS 160. This is the ideal machine for large farms and contractors alike due to the short time required for loading, wrapping and discharging, as well as the outstanding ease of use of the fully automatic E-Link control handset, versatility in terms of bale sizes and the rugged construction of the machine.

Attis PS – arms open wide for bales!

The two wide opening in-line loading arms of the PS 160 model ensure a corrective action. Bales that are not correctly presented are pushed straight in front of the wrapping table by the loading arms. As soon as the bale is in position, the arms and their top ends move inwards ensuring a tight grip on the bale. The loading arms place the bale on the wrapping table in one sequence.

Outstandingly versatile operations

The Attis PS 160 is outstandingly versatile since bale diameters may vary between 100 cm and 160 cm. To ensure efficient wrapping of various bale diameters, the pre-stretchers are height-adjustable, so that the film is always wrapped across the centre of the bale. This is possible through a pivoting point in the support of the wrapping arms. The height of the pre-stretchers can be adjusted by means of a spindle or, as an option, through the tractor hydraulics.

Two film holders means increased output

The Attis PS 160 wrapper is equipped with two pre-stretchers, which can be fitted with 500 or 750 mm rolls of film. Depending upon the number of film layers, this wrapper can process up to 90 bales per hour. The adjustable prestretchers ensure a pre-stretch of 55% or 70%. This saves film and ensures that the film is wrapped tightly around the bale. A sensor warns the operator if the film breaks or when it needs to be replaced. Thanks to a quick lock system an empty film roll can be replaced quickly and easily. The draw bar has the capacity to carry six extra rolls of film.

Automatic control accelerates the operation

The entire wrapping process is carefully operated by means of the control unit. The control unit provides a clear overview of all main functions of the wrapper. The lightened control display informs the operator on the status of the loading and wrapping process. All functions are controlled with the touch of a finger and allow for automatic programming of subsequent actions.

The unique drawbar offers enhanced possibilities

During the wrapping process, the PS 160 model can drive both in the offset position or in-line with the tractor. Due to the unique design of the hydraulically operated draw bar the operator can transport an unwrapped bale in either position. This makes the combination much narrower allowing the operator to negotiate narrow passages while transporting two bales!

Solid construction for intensive use

The simple yet exceptionally reliable frame construction ensures long machine life. Wherever possible, the steel tubes were manufactured from one piece of steel rather than welding thus reducing welding seams to the bare minimum. The loading arms are also made from steel box section, manufactured in the proper shape. This does not only look better, but is also stronger because the arm consists of one single piece.

Switching to the transport position – fast and easy

Only one push on the button is enough to get the wrapper into the transport position. The wrapping arms are locked and safe for transport.