Attis PT

Wrapping with pre-stretching and correct overlap

Once the bale is positioned on the wrapping table, the wrapper accelerates up to the correct speed in a controlled manner. The wrapping program automatically runs the pre-set number of rotations and ensures correct overlap of the film layers. Thanks to the exchangeable gears on the pre‑stretchers, the film is wrapped around the bale with a 55% or 70% pre-stretch.

Consistent wrapping across the centre of the bale

To be able to wrap the film across the centre of both small and big bales, the stretchers of the Attis PT 160 and PS 160 models are height-adjustable.

Film clamps ensuring a tight grip

When the wrapping program has completed the correct number of rotations, the film clamp holds the film tightly. A strong sharp knife cuts the film neatly. The film clamps hold the film tightly and the next wrapping cycle can begin.

Easy change of film rollers

A quick lock system on the film stretchers ensures that the empty rolls of film can be changed easily and quickly. The film stretcher is opened and closed by adjusting a leaver.

Extra strong wrapping arms

The strong wrapping arms of the PS 160 model consist of one piece and are made from steel box section. Strength is further enhanced with the absence of welding seams.

Large gears and a heavy chain

The drive line of the wrapping table has exceptionally large gears and a heavy drive chain for a long life span.

Robust design of the drawbar

The draw bar is of a very strong build and can withstand heavy force. Hitch height is adjustable to ensure effective coupling to the tractor.

Strong loading arm

The loading arm of the PT 130 consists of one single part.