Attis PT

Tremendous output

The Lely Attis PT 130 is fitted with a loading arm that can place bales with a diameter of up to 130 cm and a weight of up to 1,000 kg on the wrapping table in one sequence. The bale guides keep the bale firmly positioned on the wrapping table so that the wrapping process continues while moving on to the next bale. Depending upon the number of film layers, these wrappers can wrap up to 60 bales per hour.

Always the correct number of film layers

The Lely Attis PT 130 is equipped with an E-Link Basic semi-automatic control unit for automatic operation or for using each function individually, i.e. loading, wrapping, cutting film and discharging. A rotation counter gives the operator an acoustic signal once the wrapping table has completed the correct number of rotations. When the operator stops the wrapping table, the film clamp closes and the wrapping table is tilted backwards.

Adjustable pre-stretch system saves film

The pre-stretchers can be fitted with 500 mm or 750 mm film rollers. The adjustable pre-stretch system saves film and ensures that the film is wrapped tightly around the bale. Thanks to a quick lock system an empty film roll can be replaced quickly and easily. The draw bar has the capacity to carry three additional rolls of film.

Compact on the road

Switching from a working position into a compact transport position is easy. Simply lift the right-hand rear wheel with the loading arm and change the wheel position. This reduces the track width by 35 cm.

Gently lowering to the ground

Due to the exceptionally low build of the PT 130 model, the wrapped bale is lowered to the ground gently after the wrapping table is tilted backwards.

Solid construction for intensive use

The simple yet outstandingly rugged construction of the frame, combined with the robust steel tubing, ensures long machine life.

E-link Basic

The Lely Attis PT 130 is equipped with an E-link Basic semi-automatic control to steer an automatic program or each separate function.