Attis PT

A versatile wrapper

The Lely Attis PT 160 bale wrapper is the most versatile wrapper in today's market place. Due to the adjustable bale guides, bale widths can be varied between 125 cm and 150 cm. The adjustable loading arm will load bales with a diameter from 90 to 160 cm onto the wrapping table in one sequence. As the pre-stretcher is height-adjustable, this wrapper can always wrap the film across the centre of the bale irrespective of bale size.

Always the correct number of film layers

The Lely Attis PT 160 is fitted with an E-link Plus fully automatic control unit. The wrapping program can be configured according to the operator's individual wishes and each function can also be controlled manually. With a pause button you can temporarily interrupt the process, if for example you have to negotiate a narrow passage or if you want to unload the bales at a central location.

Smartly engineered film holders save costs

The PT 160 wrapper is equipped with a pre-stretcher, which can be fitted with 500 or 750 mm film rollers. The adjustable pre-stretchers ensure a pre-stretch of 55% or 70%. This saves film and ensures that the film is wrapped tightly around the bale. A sensor warns the operator if the film breaks or when it needs to be replaced. Thanks to the quick lock system an empty film roll can be replaced quickly and easily. The draw bar has the capacity to carry three additional rolls of film.

Solid construction for intensive use

The simple and exceptionally reliable frame construction ensures long machine life. Wherever possible, steel tubes were manufactured from one piece of steel rather than welding thus reducing welding seams to the bare minimum.

Gently lowering onto the ground

The Attis PT 160 features an active bale discharge system. As soon as the wrapping table tips backwards, the active bale discharge system is raised and takes over the bale from the wrapping table. The film is cut off neatly and held in position for the next bale. Subsequently, the bale discharge system lowers the bale gently to the ground thus avoiding damage to the film. This discharge system can also be fitted with a bale tipper allowing the operator to tip the bale on its end.

Transporting a second bale

It is possible to carry a second bale on the loading arm.

Counter-weight for enhanced stability

With its low centre of gravity and counterweight for enhanced stability, the PT 160 is ideally suited for working on slopes.

Compact transport position

By folding up the loading arm, the PT 160 is quickly ready for transport. The compact design ensures the machine is narrow for transport and it also requires little space for storage.