Attis PT

Secure bale pick-up with a strong loading arm

The build of the rugged loading arm is very solid and it ensures that bales are placed on the wrapping table without effort and in one single movement. The PT 160 model has an adjustable loading arm allowing the machine to pick up both large and small bales.

Corrective in-line loading system

The in-line loading arms of the Attis PS 160 open wide and pick the bale up easily even at high speeds. As soon as a bale is in position, the arms are closed in a tight grip, lifting the bale onto the wrapping table in one sequence. The arms ensure that bales, which are not well positioned, are correctly presented at the front of the wrapping table.

Driving when wrapping

The bale guides keep the bale in a firm position on the wrapping table. This makes it possible to drive during wrapping. The bale remains firmly positioned on the wrapping table, even in hilly conditions.

Gentle discharge of bales due to the low position of the wrapping table

The position of the wrapping table of the PT 130 and PS 160 models is exceptionally low. After the wrapping process, the table tilts backwards and gently rolls the bale onto the ground. This eliminates the risk of film damage.

Active bale discharge system on PT 160

The Attis PT 160 features an active bale discharge system. When the bale is wrapped the wrapping table tips backwards and releases the bale on to the active bale discharge system which is raised. It then gently lowers the bale to the ground.

Wrapping with pre-stretching and correct overlap

Once the bale is positioned on the wrapping table, the wrapper accelerates up to the correct speed in a controlled manner. The wrapping program automatically runs the pre-set number of rotations and ensures correct overlap of the film layers. Thanks to the exchangeable gears on the pre‑stretchers, the film is wrapped around the bale with a 55% or 70% pre-stretch.

Consistent wrapping across the centre of the bale

To be able to wrap the film across the centre of both small and big bales, the stretchers of the Attis PT 160 and PS 160 models are height-adjustable. Film clamps ensuring a tight grip When the wrapping program has completed the correct number of rotations, the film clamp holds the film tightly. A strong sharp knife cuts the film neatly. The film clamps hold the film tightly and the next wrapping cycle can begin.

Film clamps ensuring a tight grip

When the wrapping program has completed the correct number of rotations, the film clamp holds the film tightly. A strong sharp knife cuts the film neatly. The film clamps hold the film tightly and the next wrapping cycle can begin.

Easy change of film rollers

A quick lock system on the film stretchers ensures that the empty rolls of film can be changed easily and quickly. The film stretcher is opened and closed by adjusting a leaver.