A good grazing setup with automatic milking requires some specifications in order to ensure enough voluntary milkings. A selection gate like the Grazeway belongs to the basics. This selection gate steers the cow into the correct field or back into the barn. From the moment the cows started to go to the pasture the number of milkings only decreased by 2% to 2.56 milkings/cow/day (figure 1). These minor changes were caused by changes to both the distance between the robot and the pasture as well as the ration. The number of refusals, a monitor of good visit behavior, also decreased. They dropped from 3.4 to 2.7 refusals (Figure 1). The cows were still very motivated to visit the robot. So, although the introduction of grazing brought changes to visit behavior, good results were still achieved. It is important to understand how cows’ motivation to visit the robot changes. In an indoor system, cows are motivated by the concentrate fed in the robot. In a grazing system the palatability of the fresh grass can be used as motivator. The reward for visiting the robot is the chance to access a new field of fresh grass.
If cows switch to a different ration, this will affect concentrate intake. One of the reasons for grazing is to fully utilize the high nutritional value of fresh grass and therefore reduce the amount of concentrate. The amount of concentrate per 100 kg milk decreased from 21 to 20 kg (Figure 2). On an average farm with 4000 kg milk/robot/day this means a saving of 40 kg of concentrate. That could reflect $11.42/day. The different visit behavior of the cows also responds in a slightly higher percentage of rest feed. This rest feed reflects the amount the cows were not able to eat. It does not mean leftovers in the feed bin. Pay attention to the cows that visit the robot less often and therefore have no opportunity to eat all their concentrates.
You will notice that the visit behavior of the cows will change slightly when they are grazing. This is not necessarily a negative development, but it is important to keep an eye on the concentrates. Figure 2 shows a slight decrease in concentrates per 100 kg milk, along with an increase in the percentage of rest feed. Use the possibilities offered by fresh grass and adapt to the changes it might bring with regard to management. If you would like to know more, you can either find more information on grazing here, or you can contact your local Farm Management Support Advisor.
Lely Farm Management Support
Read also these tips
10 reasons to buy the Lely Vector system
We celebrated 10 years of the Lely Vector in March, the same month that the 1000th feeding and mixing robot rolled off the production line. There have been many innovations to the Vector over the years, bringing even better performance and results based on the same smart feeding principal of ensuring fresh feed is available for your herd 24/7. Here we give 10 compelling reasons why Lely Vector deserves a place on your farm: